How to disassemble and clean the shower head

In the course of using the shower, the water is always less and less, and the water pressure is getting lower and lower. This phenomenon makes many students mistakenly believe that the Shower Valve is faulty. Actually, in most cases, there is a shower (strict It is caused by the shower head, but the "black pot" is always a water heater. Many attentive students will find that the longest use of showers, the most likely problem is the shower head and shower hose, a common shower head outlet hole is blocked by sand, resulting in less and less shower head water , shower hose leaking and other phenomena, how to deal with this situation? Moon Shower here for everyone to explain how to remove the shower head cleaning and shower hose common problems.

How to disassemble and clean the shower head?

1, shower head removal

There are many different kinds of shower heads, and the manufacturer's design is different, resulting in different shower head removal methods. For most shower heads, the shower heads are designed to be removable and can be unscrewed by simply turning the shower button; some shower head designs are relatively complicated and require some tool assistance to remove the shower head, like our Brass Shower Head. Some shower designs cannot remove the shower head at all.

2, shower head cleaning

Since trace water is contained in tap water, during the long-term use of the shower, the accumulated sand gradually accumulates, and the outlet hole of the shower head will be gradually blocked. Even inside the shower, sand will be accumulated. To clean these sand stones, do the following:

1. Clean the shower head: Use the needle to open the blocked outlet hole one by one;

2. Clean the inside of the shower: Remove the head of the water pipe connected to the shower, use the water in the faucet to wash the shower backwards, then fill it with water, block the inlet, shake it vigorously, and quickly discharge the dirty water. Repeat this several times. This method can be used to clean all shower heads; if the shower head can be disassembled, it is very easy to clean the interior. Simply remove the flower head and rinse it with tap water.

 suggested: Add a stainless steel filter at the inlet of the water heater, which can effectively filter magazines in tap water.

Shower hose FAQ

Shower hoses are the most vulnerable parts of the entire water heater spare parts, and the most common problem with shower hoses is water leakage. Experts pointed out that water quality, water temperature, humidity, and materials are the main causes of shower hose leaking. All kinds of impurities in the water will cause corrosion inside the shower hose, and high water temperature will also cause some damage to the shower. . It can be seen that shower hose leakage is a normal phenomenon, but also inevitable; of course, there are also factors that consider the shape of the shower hose leaking.

Shower hose material is pvc material, rubber, hose sleeve wire, the first two materials shower hose leaking, you can use glue to glue the leaking place, and hose sleeve wire shower soft If the pipe is leaking, the best way to solve it is also the simplest way: replace the new shower hose. Change the shower hose is also very simple, close the water heater faucet, unscrew the two ends of the hose, you can replace the new shower hose on the replacement, under normal circumstances, can be unscrew directly by hand, without the use of a wrench, etc. tool.

Shower heads and shower hoses have the most problems during use, but most of them are minor problems that can be solved easily. Therefore, students who meet the above conditions should not panic, like changing shower hoses if they are themselves Really unable to solve, you can find the help of the maintenance master. The above content is all information on how to remove the shower head and the common problems of the shower hose.